佛山市蜜蜂陶瓷有限公司-意大利蜜蜂瓷砖亚太区总部

「十大品牌瓷砖」如何防止浴室瓷砖脱落?

338

作者:意大利蜜蜂瓷砖官方

新房子的装修是件大工程,而浴室的装修更要下功夫,浴室是多水的地方,不好好下功夫说不定会导致墙体瓷砖脱落的情况,这就很让人烦恼了。所以我们在装修浴室的时候要多留个心眼,所谓防患于未然嘛。

The decoration of the new house is a big project, and the bathroom decoration has to work harder. The bathroom is a watery place. If you don't work hard, it may lead to the falling off of wall tiles, which is very annoying. So when we decorate the bathroom, we should pay more attention to the so-called prevention in the future.

一、在瓷砖铺贴之前先多泡水

1, soak more water before tiles are laid

卫生间会是相对比较潮湿的空间,对于本身干燥的材料影响会比较大,如瓷砖、地砖这些需要经泡水处理的材料,在铺贴前就要延长其泡水的处理时间,目的是为了使水分接近饱和状态。这样在粘接瓷砖的时候就不会产生因为瓷砖太干燥而从水泥中吸水的情况,也就不会发生水泥粘接不牢固,泛起空鼓而脱落的现象了。

The bathroom will be a relatively humid space, which will have a greater impact on the dry material itself. For example, tiles and floor tiles, which need to be treated by soaking water, the soaking time should be prolonged before they are laid, in order to make the water close to saturation. In this way, when bonding ceramic tiles, there will be no water absorption from cement because the ceramic tiles are too dry, and there will be no phenomenon that cement bonding is not firm and the hollowing and falling off will occur.

二、在瓷砖贴砖前要清理基层面

2. Clean up the base before tiling tiles

如墙面上有乳胶漆、石灰膏、壁纸等装饰物,或者地面上有污物,那么就一定要清理干净,否则很容易引起水泥砂浆与基层的粘结不牢造成脱离;另外,假如是自身有裂痕的墙体,不做一个妥善处理就贴砖,很难保证日后不会因为墙体结构裂痕变大导致墙面砖开裂脱落的情况;最后平整度或垂直度差距太大的墙面,是一定要用水泥砂浆找平处理再进行铺贴的。

If there are decorations such as latex paint, limestone, wallpaper on the wall, or dirt on the ground, then it must be cleaned up, otherwise it is easy to cause cement mortar and the base of the bond is not strong, resulting in separation; In addition, if there is a crack in the wall itself, do not do a proper treatment to stick bricks, it is difficult to ensure that the wall will not crack in the future because of the wall structure cracks caused by cracks. In the case of falling, the wall with large difference in evenness or verticality must be leveled with cement mortar before being laid.

三、卫生间瓷砖铺贴时地面铺平

3. Floor paving when tile is laid on toilet

由内向外贴地面砖,应从下向上铺贴墙砖,为美观起见,最底层的砖应后贴。墙砖贴完后再压地砖。将未涂水泥的地砖铺在地面,敲平后,将水泥浆涂满地砖,铺于地面,四块砖的对角位置齐平。一面墙不能一次贴到顶,以防瓷砖自重较大,引起塌落。铺完地砖短时间内不要踩踏。

The floor tiles should be laid from inside to outside, and the wall tiles should be laid from bottom to top. For the sake of beauty, the bottom tiles should be posted. After the wall tiles are pasted, the floor tiles are pressed. The uncoated floor tiles are laid on the ground. After hammering, the cement slurry is coated with the floor tiles and laid on the ground. The diagonal positions of the four tiles are even. One side of the wall can not be attached to the top at one time in order to prevent the tile from falling because of its heavy weight. Do not trample on tiles for a short time after they have been laid.

四、卫生间墙面砖要充分浸水

4. Bathroom wall tiles should be fully immersed in water

墙面砖有着较高的含水率,贴砖前基层应充分浇水潮湿,不然砂浆中的水分可能会被干燥的基层和瓷砖迅速吸收而快速凝聚,从而影响其粘结牢度。否则墙砖会从水泥里吸收水分,使水泥无法起到粘贴剂的作用。

Wall tiles have a high moisture content. Before placing bricks, the base should be fully watered wet. Otherwise, the moisture in mortar may be absorbed quickly by dry base and ceramic tiles, thus affecting their bonding fastness. Otherwise, the wall brick will absorb water from the cement, so that the cement can not play the role of adhesives.

SUBMIT
YOUR REQUEST ONLINE
在线提交你的需求